2024/6/25 9:50:56
220
· Operating Voltage Range of 4.5 V to 5.5 V
· Low Power Consumption, 80-µA Max ICC
· Typical tpd = 12 ns
· ±6-mA Output Drive at 5 V
· Low Input Current of 1 µA Max
· Inputs Are TTL-Voltage Compatible
· High-Current 3-State Outputs Interface Directly With System Bus or Can Drive Up To 15 LSTTL Loads
· Data Flow-Through Pinout (All Inputs on Opposite Side From Outputs)
description/ordering information
These octal buffers and line drivers are designed to have the performance of the ’HCT240 devices and a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout.
The 3-state control gate is a 2-input NOR. If either output-enable (OE1 or OE2) input is high, all eight outputs are in the high-impedance state. The ’HCT540 devices provide inverted data at the outputs.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
热门型号
热门资讯
20万现货SKU
品类不断扩充
科技智能大仓储
4小时快速交货
仅从原厂和代理商进货
每一颗料均可原厂追溯
明码标价节省时间成本
一站式采购正品元器件
工商网监